Menu
1.Workplace Safety Training Programs Online
We support every level of critical workforce development, with online courses for safety, compliance, soft-skills, emergency care, and craft
trades.
Occupational Safety & Health
- Aerosol Transmissible Diseases
- Asbestos Hazard Awareness
- Back Safety and Injury Prevention
- Behaviour Based Safety (BBS)
- Benzene Safety
- Bloodborne Pathogens (BBP)
- Cardiopulmonary Resuscitation (CPR)
- Chemical Safety
- Chlorine Safety
- Cold Stress
- Compressed Gas Safety
- Concrete and Masonry
- Confined Space Entry - Permit Required
- Confined Spaces
- COVID-19: Workplace Safety
- Crane Safety: Mobile Cranes
- Criticality Safety
- Distracted Driving
- Driver Safety
- Electrical Safety: Hazards, Controls, and Best Practices
- Electrical Safety: General Awareness
- Emergency and Fire Safety Preparedness
- Employee Safety Orientation
- Excavation, Trenching and Shoring Safety
- Fall Protection - Construction
- Fire Extinguisher Safety
- First Aid
- Flammable Liquid Safety
- Forklift Operator
- Maritime Lockout/Tagout Plus
- Formaldehyde Safety
- Hand and Power Tools
- Hand Safety
- Hazard Communication (HAZCOM GHS)
- HAZWOPER - Decontamination
- HAZWOPER - Hazardous Materials Chemistry
- HAZWOPER - Introduction
- HAZWOPER - Personal Protective Equipment (PPE)
- Hearing Conservation
- Heat Stress
- Hot Work
- Hydrogen Sulphide (H2S) Safety
- Incident Investigation
- Indoor Air Quality
- Industrial Ergonomics
- Introduction to Caught In- Between Hazards
- Introduction to OSHA
- Job Safety Analysis
- Laboratory Safety
- Ladder Safety
- Lead Awareness
- Line Breaking
- Mobile Elevating Work Platforms: Aerial and Scissor Lift Safety
- Mobile Ladder Safety
- Muscle Sprains and Strains
- Office Ergonomics
- Office Safety
- Overhead and Gantry Crane Safety
- PACE Behavioural Driving Large Vehicles
- PACE Behavioural Driving Light Vehicles
- Pandemics: Slowing the Spread
- Passenger Van Driver Safety
- Personal Fall Arrest Systems
- Personal Protective Equipment (PPE)
- Pipeline Safety
- Power Press Safety
- Powered Industrial Truck Safety
- PPE Lessons Learned: One Time Is All It Takes
- Preventing Spills
- Process Safety Management
- Radio Communications
- Lockout Tagout for Authorized Workers
- Lockout/Tagout
- Machine Guarding
- Safety Audits
- Scaffold Safety
- Silica Hazards
- Slips, Trips, and Falls
- Small Spill Clean-up
- Respiratory Protection
- Rigging Safety
- Road Rage
- Safe Driving Behaviour for Commercial Motor Vehicles (CMVs)
- Static Electricity
- Steel Erection - Construction
- Traffic Control (Flagger)
- Valve Safety
- Work-Related Injury and Illness Recordkeeping (WRIIR)
- Workforce Hazard Recognition
Human Resources
- Absences from the Workplace
- Computer Security
- Discrimination-Free Workplace
- Drug and Alcohol-Free Workplace
- Ethics
- Violence in the Workplace
- Sexual Harassment and Discrimination Prevention for Employees
- Sexual Harassment and Discrimination Prevention for Managers
Environmental Management
- Air Emissions Management
- Emergency Planning and Community Right-to-Know Act [EPCRA]
- Wastewater Management
- Universal Waste Management
- Environmental Management Fundamentals
- Hazardous Waste Management
- Oil Spill Prevention, Control, and Countermeasure (SPCC)
- Resource Conservation Recovery Act (RCRA)
- Stormwater Management
- TSCA (Toxic Substances Control Act)
Higher Education
- University Laboratory Safety
- 3D Printer Safety
- Autoclave Safety
- Biosafety Cabinets
- Field Research Safety
- Fire Safety for Residence Halls
- Fume Hood Safety
- Handling Radioactive Materials
- Introduction to Radiation Safety
- Introduction to Biosafety
- Laboratory Compressed Gas Safety
- Laboratory Ergonomics
- Laboratory Safety Refresher
- Laser Safety
- Liquid Nitrogen Safety
- Recombinant DNA
- Risk Assessment
- Sharps Safety
- X-Ray Safety
- Shop Safety
Transportation
- DOT Hazmat
- DOT: Driver Logs
- Driver Qualifications
- Driver Wellness
- Drug and Alcohol Testing -- Employee
- Drug and Alcohol Testing for Supervisors - Reasonable Suspicion
- Hazardous Materials Transportation: Bulk Transport
- Pre- and Post-Trip Inspections
- Hazardous Materials Transportation: Handling Non- Bulk Packages
- Profiled in Safety
- Transportation of Dangerous Goods
Healthcare
- HIPAA for Covered Entities
- Medical Mandatory Collection
Mine Safety (MSHA)
- Miner Refresher Training
- New Miner Training
- Surface New Miner Training
- Surface Miner Refresher Training
Qualified Electrical Worker
- Bucket Rescue
- Communications Facilities 1910.269
- Dog Attack Prevention
- Electrical Clearances 1910.269
- Enclosed Spaces 1910.269
- Excavations 1910.269
- General Concepts 1910.269
- Grounding 1910.269
- Hand and Portable Power Tools 1910.269
- Hazardous Energy Control Procedures 1910.269
- Job Briefings 1910.269
- Ladders, Platforms, Step Bolts, and Manhole Steps 1910.269
- Line Clearance Tree Trimming 1910.269
- Working On or Near Exposed, Energized Parts 1910.269
- Mechanical Equipment 1910.269
- Medical Services and First Aid 1910.269
- Overhead Lines 1910.269
- Overhead Lines with Live-Line, Bare-Hand Work 1910.269
- Personal Protective Equipment 1910.269
- Power Generation 1910.269
- Sling Safety
- Special Conditions and Materials Handling 1910.269
- Substations 1910.269
- Testing and Test Facilities 1910.269
- Underground Electrical Installations 1910.269
- Vault and Pole-Top Rescue 1910.269
- Working with Self-Contained Meters
Arc Flash Training (NFPA 70E)
- Arc Flash Training (NFPA 70E)
HAZWOPER
- 8 Hour Refresher Training
OSHA 10 & 30
- OSHA 10 Hour Construction Safety
- OSHA 10 Hour General Industry
- OSHA 30 Hour Construction Safety
- OSHA 30 Hour General Industry
Food Safety
NERC System Operator Certification and Continuing Education
- Food Manufacturing: Quality Assurance Programs
- Food Manufacturing: Site Security
- Food Safety for Food Handlers
- HACCP for Managers
- HACCP for Operators
Database CEH
- Active and Reactive Power Fundamentals (2.0 CEHs)
- Active and Reactive Power Limits and Flows
- Automatic Generation Control (3.0 CEHs)
- Bulk Power System Communication Basics (1.0 CEHs)
- Bulk Power System Communications and Coordination (2.0 CEHs)
- Bus Protection (1.5 CEHs)
- Characteristics of Distribution Switchgear (1.0 CEHs)
- Coordinating Entities and Duties (IN PILOT)
- Distribution System Components and Application (1.0 CEHs)
- Disturbance Control Performance (2.0 CEHs)
- Disturbance Monitoring Equipment (2.0 CEHs)
- Economic Power System Operations (IN PILOT)
- Electrical Distribution System Fundamentals (1.5 CEHs)
- Elements of System Protection (2.5 CEHs)
- CIP Controls and Management (1.0 CEHs)
- CIP Perimeters and Configurations (1.0 CEHs)
- CIP Personnel Responsibilities (1.0 CEHs)
- CIP Physical Security (1.0 CEHs)
- CIP Related BES Recovery Plans (1.0 CEHs)
- Generator Construction and Process Control (1.0 CEHs)
- Generator Protection (2.5 CEHs)
- Interconnected Energy Accounting (2.0 CEHs)
- Line Protection (1.0 CEHs)
- Load Characteristics and Management (1.0 CEHs)
- Low Voltage Breakers (1.0 CEHs)
- Main Transformers (1.5 CEHs)
- Medium and High Voltage Switchgear (2.0 CEHs)
- Monitoring System Conditions (2.5 CEHs)
- NERC Overview and Application for Generator Operators (2.0 CEHs)
- Emergency Policies and Procedures (1.5 CEHs)
- Energy Production and Transfers (1.5 CEHs)
- Frequency Response and Bias (2.0 CEHs)
- General Switchgear Maintenance (1.5 CEHs)
- Generator and Auxiliary Systems Functions (1.0 CEHs)
- Protective Relays and Instrument Transformers (1.0 CEHs)
- Protection System Misoperation and Maintenance (1.5 CEHs)
- Real Power Balancing Control Performance (3.0 CEHs)
- Reliability Coordination – Planning and Operations (1.5 CEHs)
- Single and Poly-phase Metering (1.0 CEH)
- Steam Turbine Control and Operation (1.5 CEHs)
- Supervisory Control and Data Acquisition Systems (SCADA) (2 CEHs)
- Switchgear (2.0 CEHs)
- Transformer Protection (1.0 CEHs)
- Pilot Protection (1.0 CEHs)
- Power System Control Elements (1.5 CEHs)
- Power System Restoration (2.0 CEHs)
- Preparing for Power Plant Start-ups (1.5 CEHs)
- Primary and Secondary Distribution Systems (1.5 CEHs)
- Principles of Revenue Metering (1.5 CEHs)
- Transmission Operations (2.5 CEHs)
- Types of Protective Relays (2.5 CEHs)
Safety, Health, and Plant Science
- Introduction to Industrial Hygiene
- Hazardous Materials Safety
- Acid and Caustic Awareness
- Ammonia Awareness
- Radiation Awareness
- Hazardous Gases Methane, Carbon Monoxide, and Carbon Dioxide
- Gas Monitoring Basics
- Toxicology
- Medical Surveillance
- Hazardous Material Procedures
- Root Cause Analysis
- Safety and Health Programs
- Introduction to Industrial Math
- Industrial Math: Measurements and Calculations
- Industrial Math: Fractions, Percentages, and Ratios
- Atomic Structure and Chemical Bonding
- Introduction to the Periodic Table of Elements
- Chemical Formulas, Reactions, and Solubility
- Introduction to Hydrocarbon Chemistry
- Chemical Equations
- Introduction to Physics Force and Motion
- Introduction to Physics Energy, Work, and Power
Mechanical Maintenance
- Working Principles of Simple Machines
- Hand Tools I
- Hand Tools II
- Portable Power Tools
- Torque Wrenches
- Introduction to Belt Drive Maintenance
- V-Belts
- Positive Traction Belt Drives
- Sheave Maintenance
- Introduction to Conveyor Systems
- Conveyor System Design
- Conveyor Belt System Inspection
- Conveyor Belt Installation and Repair
- Introduction to Bearings
- Rolling Contact Bearings
- Sliding Surface Bearings
- Bearing Installation and Removal
- Bearing Seals
- Troubleshooting Bearing Failures
- Introduction to Gear Drives
- Types of Gears
- Maintaining Gear Drives
- Clutches
- Lubrication Selection and Sampling in Rotating Machinery
- Lubrication Failures and Management in Rotating Machinery
- Lubrication Analysis in Rotating Machinery
- Pipe Connections and Symbols
- Piping Construction and Sizing
- Piping Expansion, Support, and Insulation
- Piping Auxiliaries
- Tubing Types and Applications
- Tube Fittings and Connection Methods
- Tube and Conduit Bending
- Couplings
- Pre-Alignment Procedures
- Rough Alignment
- Mathematical Rim-and- Face Alignment
- Graphical Rim-and-Face Alignment
- Reverse Dial Alignment
- Laser Alignment
- Introduction to Chain Drives
- Chain Drive Maintenance and Troubleshooting
- Lubrication Basics
- Types of Lubricants
- Lubrication Sampling and Analysis
- Lubrication Filtration and Purification
- Lubrication Delivery Methods and Systems
- Introduction to Valves and Their Components
- Valve Actuators
- Gate Valves
- Globe Valves
- Butterfly Valves
- Ball Valves
- Check Valves
- Needle Valves
- Plug Valves
- Diaphragm Valves
- Pinch Valves
- Safety and Relief Valves
- Solenoid Valves
- Valve Positioners
- Pressure Regulator Valves
- Introduction to Centrifugal Pumps
- Centrifugal Pump Design
- Centrifugal Pump Fundamentals
- Centrifugal Pump Operation
- Heat Exchanger Theory
- Open Heat Exchanger Design and Operation
- Closed Heat Exchangers
- Compressed Air System Components
- Positive Displacement Compressors
- Dynamic Compressors
- Bolted Joints
- O-Rings
- Making Gaskets
- Fasteners
- Packing Material Use and Installation
- Mechanical Seals Use and Installation
- Introduction to Positive Displacement Pumps
- Reciprocating Positive Displacement Pumps
- Displacement Pumps
- Introduction to Hydraulics
- Hydraulic Systems
- Hydraulic Fluids
- Vibration Introduction
- Vibration Causes and Characteristics
- Plant Vibration Program
- Boiler Tube Repair
- Inspecting the Fireside of a Boiler, Part 1
- Inspecting the Fireside of a Boiler, Part 2
- Inspecting the Waterside of a Boiler
- Inspecting a Boilers Exterior
- Waterside and Fireside Cleaning of a Boiler
- Compressed Air Systems
Electrical Distribution
- Primary and Secondary Distribution Systems
- Distribution System Components and Application
- Characteristics of Distribution Switchgear
- Load Characteristics and Management
- Principles of Revenue Metering
- Single and Poly-phase Metering
- NERC Overview and Application for Generator Operators
- Elements of System Protection
- Types of Protective Relays
- Monitoring System Conditions
- Disturbance Monitoring Equipment
- Line Protection
- Transformer Protection
- Pilot Protection
- Bus Protection
- Generator Protection
- Protection System Misoperation and Maintenance
- Protection Systems Maintenance Programs
- Real Power Balancing Control Performance
- Disturbance Control Performance
- Frequency Response and Bias
- Automatic Generation Control
- Bulk Power System Communication Basics
- Bulk Power System Communications and Coordination
- CIP Personnel Responsibilities
- CIP Perimeters and Configurations
- CIP Controls and Management
- CIP Related BES Recovery Plans
- CIP Physical Security
- Emergency Policies and Procedures
- Capacity and Energy Emergencies
- Reliability Coordination – Planning and Operations
- Coordinating Entities and Duties
- Reliability Responsibilities and Authorities
- Energy Production and Transfers
- Transmission Operations
- Economic Power System Operations
- Power System Control Elements
- Interconnected Energy Accounting
- Supervisory Control and Data Acquisition Systems (SCADA)
- Power System Restoration
- Active and Reactive Power Fundamentals
- Active and Reactive Power Limits and Flows
Electrical Maintenance
- Electron Theory
- Magnetism and Electromagnetism
- Ohms and Kirchoffs Laws Relating to DC Circuits
- Evaluating Series and Parallel DC Circuit Performance
- Determine Circuit Outputs from Specified Inputs
- Introduction to Alternating Current
- Ohms and Kirchoffs Laws Involving AC Circuits
- Inductance in AC Circuits
- Capacitance in AC Circuits
- Impedance in AC Circuits
- AC Power
- Fundamentals of Three-Phase AC
- Power Quality
- Harmonics
- High-voltage AC
- AC Induction Motors
- AC Generators
- AC Induction Motor Theory
- Troubleshooting AC Induction Motors
- AC Induction Motor Maintenance
- Overhauling Induction Motors
- Generator System Heat Protection
- Generator Overhaul
- DC Motors and Generators
- DC Motors and Generators Troubleshooting and Maintenance
- Introduction to Motor Controls
- Motor Protection and Fault Diagnosis
- Motor Control Troubleshooting
- Motor Control Centers
- AC Drives Overview
- Transformer Basics
- Transformer Design and Components
- Transformer Connections
- Special Transformers
- Battery Basics
- Electrical Backup Systems
- Uninterruptible Power Supplies (UPS)
- Switchgear
- Low Voltage Breakers
- Medium and High Voltage Switchgear
- General Switchgear Maintenance
- Breaker Specific Maintenance
- Circuit Breaker Time- Travel Characteristics and Testing
- Electrical Faults and Current Ratings
- Overcurrent Protection; Fuses and Breakers
- Protective Relays
- Generator, Transformer, and Motor Protection
- Grounding and Bonding
- MOV (Motor Operated Valve) Application and Construction
- MOV (Motor Operated Valve) Disassembly and Inspection, Part 1
- MOV (Motor Operated Valve) Disassembly and Inspection, Part 2
- Limit Switch Adjustment
- Wire and Cable Management
- Terminating and Connecting Wires in a Control Panel
- Making Connections in a Junction Box
- Installing Conduit and Pulling Wire
- Introduction to Medium Voltage Cable
- Medium Voltage Splices and Terminations
- Troubleshooting AC Circuits
- Troubleshooting DC Circuits
- Electrical Freeze Protection Components and Application
Process Systems and Operations
- Introduction to Petroleum Refining
- Basic Petroleum Chemistry
- OSHAs Process Safety Management Standard
- History of Refining
- Features and Operation of Process Heaters
- Features and Uses of Process Tanks
- Introduction to Distillation
- Start-up; Normal Operation and Shutdown of a Distillation Column
- Introduction to Process Separators
- Introduction to Process Reactors
- Introduction to Naphtha Reforming
- Safety Alarm Systems and Instrumentation
- Overpressure Safety Systems
- Process Utilities Systems, Part 1
- Process Utilities Systems, Part 2
- Process Product Movement and Shipment
- Tanks and Vessels Used for Storage
- Sampling Principles and Methods
- Testing Principles and Procedures
Industrial Machining and Welding
- Introduction to Measuring and Care of Measuring Tools
- Measuring Rules and Tapes
- Micrometers
- Fixed Gauges
- Measuring with Calipers
- Dial Indicators
- Telescoping Gauges
- Layout and Bench Work
- Threading and Tapping
- Vertical Milling Machine
- Engine Lathe
- Surface Grinder
- Pedestal Grinder
- Bandsaw
- Drill Press
- Scaffold Erection and Components
- Rigging, Part 1
- Rigging, Part 2
- Rigging, Part 3
- Ladders
- Overhead Cranes
- Aerial Lift Devices
- Safe Welding and Cutting Practices
- Weldability of Metals
- Shielded Metal Arc Welding (SMAW)
- Gas Metal Arc Welding (GMAW)
- Tungsten Inert Gas (TIG) Welding
- Oxyacetylene Welding (OAW)
Instrumentation and Control
- Instrumentation and Control Overview
- Principles of Temperature
- Principles of Pressure
- Principles of Level
- Principles of Flow
- Temperature Instruments
- Pressure Measuring Devices
- Level Measuring Devices
- Flow Measuring Devices
- Weight Measuring Devices
- Multimeters
- Oscilloscopes
- Power Suplies
- Signal Generators
- Digital Thermometers and Calibrators
- Manometers
- Pressure and Vacuum Calibrators
- Megohmmeters
- Analytical Instruments
- Introduction to Analytical Testing
- Calibration Overview, Part 1
- Calibration Overview, Part 2
- Introduction to Troubleshooting
- Instrument Troubleshooting
- P&ID Basics
- Reading a P&ID
- Electrical Drawings
- Logic Diagrams
- Industrial Print Reading Overview
- Introduction to Automated Control
- Pneumatic and Electronic Control System
- Introduction to Switches
- Electronic Control Systems
- Signal Transmission
- Basic Principles of Industrial Transmitters
- Smart Transmitters
- Transducers
- Controller Control Modes
- Operation of Automatic-Manual Transfer Stations
- Final Control Elements
- Introduction to Industrial Electronics
- Digital Electronics and Microprocessors
- Introduction to Programmable Logic Controllers (PLC)
- InputOutput IO Processing
- Inputs and Outputs
- PLC (Programmable Logic Controllers) Programming Instructions, Part 1
- PLC (Programmable Logic Controllers) Programming Instructions, Part 2
- PLC (Programmable Logic Controllers) Networks
- PLC (Programmable Logic Controllers) Network Protocols
- Air Conditioning Fundamentals
- Ductless Air Conditioning
- Introduction to Industrial and Commercial Refrigeration
- Refrigerant System Troubleshooting
- Chiller Design and Maintenance
- Ducting and Air Movement for HVAC Systems
Power Generating Systems and Operations
- Energy Conversion
- Steam Turbine Basics
- Combustion System Component Overview
- Boiler Water and Steam Cycle Overview
- Generator Overview
- Steam Turbine Design
- Steam Turbine Control and Operation
- Steam Turbine Auxiliaries
- Steam Turbine Governor System
- Generator and Auxiliary Systems Functions
- Generator and Auxiliary Systems Flow Paths and Major Components
- Generator Construction and Process Control
- Generator and Auxiliary Systems Start-up
- Generator and Auxiliary Systems Normal Operations
- Generator and Auxiliary Systems Shutdown
- Gas Turbine Fundamentals and Configuration of Generating Facilities
- Introduction to the GE LM Series Gas Turbine
- Introduction to GE Frame Series Gas Turbines
- Introduction to the Siemens V-Series Gas Turbine
- Heavy Duty Gas Turbines – Major Components and Support Systems
- Aero-derivative Gas Turbines – Major Components and Support Systems
- Fundamentals of Gas Turbine Operation and Routine Maintenance
- Gas turbine Control Schemes
- Gas Turbine Fuel and Combustion Systems
- Gas Turbine Lube Oil and Control Oil Systems
- Gas Turbine Air Systems
- Gas Turbine Water Wash and Drain Systems
-
Introduction to Combustion Air and Flue Gas Systems
Combustion Air and Flue Gas Flow Paths and Components - Control Loops and Methods of Control
- Combustion Air and Flue Gas System Start-up
- Maintaining Fan Operations in Combustion Air and Flue Gas Systems
- Shut Down Process
- Coal Handling System
- Boiler Fuel System Function
- Process and Methods of Control for the Boiler Fuel System
- Boiler Fuel System Start-up
- Normal Operation of the Boiler Fuel Systems
- Shutdown for the Boiler Fuel System
- Combustion Theory
- Basic Boiler Design
- Boiler Valves and Fittings
- Boiler Fuel and Air Systems
- Boiler Water and Steam Cycle
- Boiler Heat Recovery Systems
- Scrubbers and Ash Removal Systems
- Boiler Operator Roles and Responsibilities
- Fuel Combustion and Controls
- Boiler Burner Controls and Management
- Flue Gas Desulfurization System
- Flue Gas Desulfurization System, Open Spray Design, Part 1
- Flue Gas Desulfurization System, Open Spray Design, Part 2
- Dry Scrubber Operation
- 535-05 - Selective Catalytic Reduction (SCR) System
- Introduction to Continuous Emission Monitoring Systems
- Fundamentals of Using a CEMS
- Calibration of CEMS Components
- Introduction to the Circulating Water System
- Function of the Circulating Water System
- Circulating Water System Components
- Circulating Water System Start-up
- Circulating Water System Normal Operations
- Circulating Water System Shutdown
- Circulating Water System Controls
- Cooling Towers Operating Principles and Designs
- Cooling Towers Components
- Air Cooled Condensers
- Introduction to the Condensate System
- Introduction to the Feedwater System
- Condensate and Feedwater Systems Operation
- Condensate and Feedwater System Control
- Pumps and Associated Auxiliary Equipment
- Boiler Feed Pump Flow Path and Major Components
- Boiler Feed Pump Water Supply and Control Systems
- Boiler Feed Pump Start-up
- Boiler Feed Pump Daily Operations
- Function of the Boiler Water and Steam Systems
- Flow Paths and Components of the Boiler Water and Steam Systems
- Start-up Procedures for the Boiler Water and Steam Systems
- Normal Operation of the Boiler Steam and Water Cycle
- Shutdown of the Boiler Water and Steam Systems
- Molecular Chemistry of Water
- Elements and the Periodic Table of Elements
- Chemical Compounds
- Corrosion Causes and Effects
- Corrosion Control in Steam Production
- Steam Chemistry Control and Guidelines
- Industrial Water Treatment Systems
- Introduction to Desalination
- Desalination: Pre- and Post-treatment of Water
- Reverse Osmosis
- Thermal Desalination Technologies
- Main Transformers
- Station Service System
- Fuses and Circuit Breakers
- Plant Protection Protective Relays and Instrument Transformers
- Equipment Disconnects and Grounding
- Using Distributed Control System Diagrams
- Preparing for Power Plant Start-ups
- Power Plant Start-up Procedures
- Preparing for Power Plant Shutdowns
- Power Plant Shutdown Procedures
- Basic Power Plant Efficiency
- Water and Steam Terms and Principles
- Heat Transfer Principles
- Laws and Principles of Thermodynamics
- Performance Parameters
- Balancing Efficiency; Availability; Capability and Flexibility
- Instrumentation and Controls
- Boiler Efficiency
- Boiler Efficiency
- Boiler Reliability
- Turbine Efficiency
- Condenser Efficiency
- Condenser Operation and Reliability
- Feedwater Heater Operation and Efficiency
- Pump Efficiency and Reliability
- Environmentally Sensitive Operations
- Distributed Control System Fundamentals
- Distributed Control System Components
- Power Plant Unit Control
- Understanding the Basic Properties of Water and Steam
- Saturated Steam Tables
- Superheated Steam Tables
- Diesel Engines for Power Generation
- Diesel Engine Support Systems
- Diesel-Powered Generation
- Diesel Power Plant Operations
- Diesel Plant Control Systems and Protective Devices
- Diesel Plant Routine Maintenance
- Combined Cycle Power Plants
- Combined Cycle Power Plant Components
- HRSG Flow Path and Major Equipment
- HRSG – Auxiliary Equipment and Systems
- HRSG Basic Operating Concerns and Conditions
- Combined Cycle Steam and Feedwater Operating Principles
- Combined Cycle Condensate and Circulating Water Systems
- Combined Cycle Auxiliary Systems
- The Hydroelectric Role in the Power System
- Hydroelectric Power Stations
- Water Management
- Hydroelectric Generators
- Generator Monitoring and Control
- Hydroelectric Plant Auxiliaries
- Operating Electrical Equipment in a Hydroelectric Plant
- Mechanical Governor
- Introduction to Biomass Power Plants
- Biomass and Waste to Energy Power Plants
- Basic Wind Turbine Design
- Wind Farm Design
- Horizontal Wind Turbine Design and Operation
- Wind Energy Production
- Introduction to Reciprocating Engine Power Plants
- Fundamentals of Reciprocating Engine Design
- Reciprocating Engine Auxiliary Systems
- Reciprocating Engine Electrical and Control Systems
- Reciprocating Engine Operations
- Generator Control in Reciprocating Engine Power Plants
- Nuclear Power Principles and Design
- PWR and BWR Operation and Design
- Introduction to Solar Energy
- Solar Energy Photovoltaic
- Solar Energy Thermal Applications
Manager Course Bundles
- Building Trust and Respect
- Coaching Career Development
- Communication Skills for Managers
- Conflict Management Skills
- Creating Great Teamwork
- Customer Service Management
- Delegating Work
- Developing and Coaching Employees
- Discussing Total Compensation
- Giving Great Feedback
- Increasing Employee Engagement
- Leadership Essentials
- Leading the Organization Strategy
- Management Essentials
- Managing for Success
- Meeting Management
- Onboarding New Employees
- Project Management
- Providing Resources for Success
- Recognizing Employees
- Retaining Your Employees
- Supervision Basics
Individual Contributor Course Bundles
- Basic Business Skills
- Become a Contributing Project Team Member
- Building Your Career
- Building Your Leadership Skills
- Communicating Technical Information
- Communicating with Others
- Creating Great Work
- Customer Service Basics
- You and Your Boss
- Design Thinking
- Developing for Success
- Developing Work Relationshipss
- Email and Text Etiquette
- Increasing Your Contribution at Work
- Personal Behaviors and Conduct
- Starting a New Job
Individual Contributor Toolkits
- DISC Communication
- Work Successfully from Home
- Process and Quality Improvement
- Writing to Get Things Done
Sales Toolkits
- Conducting Great Online Demos and Sales Calls
- Relationship Selling
- Predictable Revenue
Toolkits
- The Respectful Workplace
- Compliance
EMS & Firefighter Annual Subscriptions
- 24-7 EMS
- 24-7 Fire
- 24-7 EMS & Fire Combo
- Disaster and Counter-Terrorism Medicine
EMS Continuing Education
Airway, Respiration & Ventillation
- Capnography (v2)
- Carbon Monoxide Poisoning (v2)
- Geriatric Respiratory Emergencies (v2)
- Pediatric Respiratory Emergencies (v2)
- Respiratory Emergencies: CPAP (v2)
- Supraglottic Airway Management (v2)
Cardiovascular
- 12-Lead Electrocardiogram (ECG) (v2)
- Acute Coronary Syndrome (ACS) Care (v2)
- Code Management (v2)
- CPR and ECC Update: 2015 Guidelines (v2)
- Guidelines (v2) • Geriatric Assessment (v2)
- Heart Failure (v2)
- Medical Assessment (v2)
- Pediatric Airway Management (v2)
- Pediatric Cardiac Arrest: Management and Response (v2)
- Stroke (v2)
- Sudden Cardiac Death (v2)
- VAD Patients: EMS Response (v2)
Trauma
- Combat-Related TBI (v2)
- Field Triage Update (v2)
- Intraosseous Vascular Access (v2)
- Spinal Injury Management (v2)
- Sports Injuries (v2)
- Tourniquets & Hemorrhage Control (v2)
- Triage (v2)
Medical
- Anaphylaxis (v2)
- Asthma (v2)
- Behavioral Emergencies: Excited Delirium (v2)
- Bloodborne Pathogens (v2)
- Communicable Diseases: Childhood & Travelers (v2)
- Deaf and Hard of Hearing: Response Awareness (v2)
- Diabetic Emergencies (v2)
- Ebola Awareness for EMS (v2)
- Infection Control: MRSA (v2)
- Infectious Disease Update & Personal Protection (v2)
- Medication Delivery in EMS (v2)
- Neonatal Care/Resuscitation (v2)
- Obstetrics & Childbirth (v2)
- Opioid Epidemic: Response for EMS (v2)
- Pain Management (v2)
- Pediatric Behavioral Emergencies: Autism (ASD) (v2)
- Seizures (v2)
- Street Drugs (v2)
- Trauma During Pregnancy (v2)
Operations
- Assault Victim Care (v2)
- Back Injury Prevention for EMS (v2)
- Bariatric Patient: Care & Transport (v2)
- Crew Resource Management (v2)
- Cyanide Poisoning (v2)
- DMAT & Mass Gathering Medicine (v2)
- Domestic Violence (v2)
- Emergency Driving (v2)
- Emergency Responders, Fire, and Cancer (v2)
- Emergency Vehicle Operations (v2)
- Geriatric Behavioral Emergencies (v2)
- Geriatric Poisonings (v2)
- Geriatric Trauma: Hip Injuries (v2)
- HazMat: EMS Response (v2)
- Human Trafficking: An EMS Perspective (v2)
- Lifting & Moving (v2)
- Managing Multiple Patients: EMS Operations (v2)
- MCI Management: Transportation Group (v2)
- Medication Errors & Equipment Failures (v2)
- Pediatric Assessment (v2)
- Pediatric Emergencies: Burns (v2)
- Pediatric Fevers and Seizures (v2)
- Pediatric Poisoning (v2)
- Pediatric Trauma (V2)
- Pregnancy: Medical Emergencies (v2)
- Report Writing (v2)
- Respiratory Protection for Emergency Responders (v2)
- Responder Wellness and Fitness (v2)
- Role of Research and EBGs (v2)
- Scene Safety (v2)
- Scene Safety: Meth Labs (v2)
- Workplace Stress (v2)
Additional Courses
- Abdominal Emergencies (v2)
- Abdominal Trauma (v2)
- Affective Characteristics (v2)
- Agricultural Hazmat: EMS Response (v2)
- Air Medical Transports (v2)
- Assessment: Medical Patient (v2)
- Blunt Chest Trauma (v2)
- Bomb Blast Injuries (v2)
- Burns: Thermal (v2)
- Cold Weather Emergencies: Hypothermia (v2)
- Critical Decision Making (v2)
- Crush Injuries (v2)
- Electrical Injuries (v2)
- EMS Flood Response (v2)
- Entrapped Patients (v2)
- Eye Injuries: Response for EMS (v2)
- Extreme Heat Emergencies (v2)
- Extreme Sports Injuries: Extremity Trauma (v2)
- Extrication & Patient Packaging (v2)
- Facial Injuries (v2)
- Interpreting Vital Signs (v2)
- Mechanism of Injury (v2)
- Medical Assessment: Syncope (v2)
- Musculoskeletal Emergencies (v2)
- MVC Management (v2)
- Patient Refusal (v2)
- Renal Failure: Acute (v2)
- Renal Failure: Chronic (v2)
- Risk Management: Refusals & Abandonment (v2)
- Social Media & EMS (v2)
- Summer Emergencies (v2)
- Tactical EMS (v2)
- Terrorism: EMS Readiness (v2)
- Trauma Assessment (v2)
- Understanding Shock (v2)
- Water Rescue Considerations for EMS (v2)
Firefighter Development
Firefighter Series
- Basic Fire Streams
- Basic Fireground Communications
- Basic Hoisting Operations
- Basic Pump Operations
- Basics of High-Rise Firefighting
- Breaching Masonry Walls Basics
- Building Construction Awareness
- Care and Maintenance of Forcible Entry Tools
- Cold Weather Operations
- Driver Operations
- Elevator Safety Response Awareness
- Exterior Class A Fires
- Extrication Update: Newer and Hybrid Vehicles
- Firefighter Rehab
- Fireground Hydraulics: Basic Concepts
- Ground Ladders
- Hazardous Materials
- HazMat Operations Update
- Home Safety Surveys
- Hose Appliances
- Hydrogen Sulfide Suicide Awareness
- Interior Structure Fires
- Introduction to Forcible Entry
- Introduction to NIMS-ICS
- Introduction to the Wildland Urban Interface
- Mass Decontamination: The Basics
- NFIRS & Documentation
- Overview of Aerial Operations
- Portable Fire Extinguishers
- Portable Ground-Ladder Rescues
- Positive Pressure Ventilation
- Safety on the Fireground
- Safety: Firefighter Fitness Basics
- Safety: Rapid Intervention Crews
- Safety: Respiratory Protection and SCBA
- Safety: Responding to Violence
- Safety: Water Emergencies
- Salvage and Overhaul
- Scene Lighting
- Search and Rescue
- Search Operations: Building Fires
- Utilities Shut Off
- Vehicle Fires
- Vertical Ventilation: Pitched Roof
- Water Supply & Tender Operations
Officer Development
- Basic Documentation for the Officer
- Best Practices: Customer Relations
- Budgeting Basics
- Ethical Issues
- Handling Conflicts
- Handling Personnel Issues
- Leadership Styles
- Managing the Difficult Employee
- Media Relations: The Basics
- Professional Development
- Time Management
Inspector Series
- Building Construction
- Customer Service
- Electrical Systems
- Fire Alarm Systems: Introduction
- Hazardous Materials for the Fire Inspector
- Hydrant Inspections
- Identifying Hazards During Inspections
- Inspection Techniques
- Interpreting Model Fire Codes
- Introduction to Report Writing
- Suppression Systems: Wet and Dry
- Workplace Violence